As soon as you have decided on what you will be performing in the space your next step is to prepare it. Preparing the area is the most essential portion of the painting project. Terrible preparation will give you lousy final results on the finished solution.

The 1st thing to do in finding a space ready for painting is either removing almost everything in it or putting every little thing into the middle of the area. If Best wood filler for painting can’t take the stuff out of the space by putting it into the middle will give you clear access to the walls around the space. If you have heavy furniture on the hardwood floor or on a carpet occasionally less complicated to place some thing below each and every leg such as a furniture foot pad with a felt bottom if you are moving this furniture on challenging wood floor and if you have this furniture on a carpet is sensible to have a big cloth (drop cloth) below the legs of the furnishings and then you can pull the dropcloth to move the furnishings a lot more conveniently. Now that you have moved all the furnishings into the center of the area, you are ready to cover all the floors.

I typically use a 4′ x 12′ length of drop sheet called a runner, I go all the way around the space to cover all the floor area. Then I take some masking tape (green or blue tape) to attach it to the baseboard or really close to the baseboard on the floor to avoid sprinkle, from hitting the floor from the roller.

Next I go around with a problems light shining it on an angle to the wall looking forward at any defects on the wall. I take a lead pencil and mark any defects. Subsequent I go with some premixed plaster to fill in these holes such as holes from picture nails and modest hairline cracks in the drywall. If you have substantial deep locations then you have to use some rapid dry filler compound which you have to mix up with water. And when applying this plaster you must leave a tiny added on best simply because plaster usually shrinks following it dries.

Sanding the plaster repairs should really be carried out with a flat sanding pad or a flat sanding sponge to protect against over sanding into the plaster which will leave the depression in the wall right after painting.